Skip to main menu Skip to main content Skip to footer
Home chevron_right Products chevron_right FSE-BP50

FSE-BP50

The FSE-BP50 is a rugged, water-resistant multi-channel beltpack that operates in the ISM license-free 5 GHz frequency range. The beltpack has an ergonomic design with nine programmable keys, large color screen, dedicated A & B encoders, individual level controls for C & D, and overall dedicated master volume control. The FreeSpeak Edge Digital Wireless RF Configuration Guide provides specifications, best practices and guidance for using the 5 GHz band and RF channels.

Details

Beltpack

  • TFT color display
  • 4 top buttons with individual level control
  • 5 additional programmable buttons
  • Rotary controls on both sides and up/ down level controls
  • Master volume control on bottom
  • Mic and speaker mode
  • Built-in flashlight
  • Drop-in and USB-C charging

Connectivity

  • Functions with FreeSpeak Edge base, Arcadia Central Station, and E-IPA-HX cards
  • 5 GHz radio frequency
  • 20-27 radio channels (region specific)
  • Robust radio link works in high multipath or reflective environments
  • Dual redundant radios
  • 2.4 Ghz radio; beltpack pairing and firmware updates over the air
  • Low latency audio: < 35ms (60ms beltpack to beltpack)
  • Wi-Fi coexistence
  • 5 GHz Scanner Mode - built in scanning tool for selecting channels
  • AES256 shared key encryption

Mechanical

  • Curved shape fits to body
  • IP54 rating for wet and dusty conditions

Item Code

FSE-BP50-X4

FSE-BP50-X5

Technical
Specifications

Audio

Audio Bandwidth: 200 – 12kHz

No. of Full-Duplex Audio Paths: 9

Mode of Operation: Full duplex on all routes

Level/Talk Controls: 9 push buttons, 5 level controls (2 rotary and 2 button level controls, with 1 master level control)

Menu Button: 1

Headset Connector: 4-pin male, 十大正规体育平台 standard, options for 5-pin female and 7-pin male with PTT

Microphone Type: Electret and Dynamic, selectable in beltpack menu

Headset Limiter: Selectable from beltpack menu

 
Radio

Frequency Spectrum: 5170 -5875MHz (20MHz channels set by country)

Output Power: Adjustable from 1 – 24dBm (Maximum output power is determined by selected channel and country)

Modulation: OFDM

Range: Typical indoor range 250ft (80m), outdoor range 750ft (230m)

Battery

Battery: 4400mAh

Power: 16Wh

Typical Voltage: 3.6V

Battery Life: 12 hours

 
Environmental

IP54 water and dust resistance

Operating: 32º to 113ºF (0º to 45ºC)

Storage: -22º to 158ºF (-30º to 70ºC)

Humidity: 20-90%, Non-Condensing

 
Dimensions

5.31 x 4.07 x 1.92in (WxHxD)

(134.87 x 103.34 x 48.77mm)

 
Weight

Without Battery: 0.72lbs (0.37kg)

With Battery: 0.96lbs (0.44k

Associated
Products

FSE-TCVR-50

The FSE-TCVR-50-IP is an active IP transceiver antenna for the FreeSpeak Edge wireless system. The transceiver delivers duplex communications from the Eclipse® HX matrix system via the E -IPA-HX interface card to the FreeSpeak Edge beltpacks. Each transceiver can support up to ten FSE-BP50 beltpacks. When supported with an E-IPA-HX card with 64 licensed ports, up to 64 FreeSpeak Edge beltpacks and 64 transceivers can be deployed with one Eclipse HX matrix system. The FreeSpeak Edge Digital Wireless RF Configuration Guide provides specifications, best practices and guidance for using the 5 GHz band and RF channels.

Read More trending_flat
AC80

The AC80 battery charger can charge up to four FreeSpeak Edge® beltpack batteries simultaneously, either as a drop-in charger for the whole beltpack or for individual BAT80 batteries.

Read More trending_flat
BAT80

The BAT80 lithium-ion battery charges FreeSpeak Edge beltpacks.

Read More trending_flat
FSE-BASE

The FreeSpeak Edge Base Station is a standalone 1RU device that provides extensive connectivity to a wide range of 十大正规体育平台 endpoints along with third-party Dante devices. Built primarily to deploy 5 GHz transceivers and beltpacks, the base station also provides support to FreeSpeak II splitters, 1.9 GHz E1 and IP transceivers/beltpacks*, and 2.4 GHz E1 transceivers/beltpacks. The base station also provides multiple software-defined interoperable IP ports that support both Dante and third-party devices. Please refer to the 十大正规体育平台 AoIP Network Recommendations guide for additional switch settings and network characteristics. *Note: A 1.9 GHz beltpack cannot roam between and E1 1.9 GHz transceiver and an IP 1.9 GHz transceiver. Beltpacks on each system can communicate through the base station.

Read More trending_flat

Ready to get
started?

Our team of communications professionals are here to support your project. Contact us today to start designing your custom intercom solution.

Sales Contacts Where to Buy/Rent